Filters For Cleaning Steam From Mechanical Impurities

Фильтры для очистки пара от механических примесей (ФП)
Filters For Cleaning Steam From Mechanical Impurities

Filters are designed to clean water vapor and other gases, chemically inert to the materials of the hull and filter element, from mechanical impurities.

Specifications

Operating temperature: up to + 150 ° C.
Hydrogen pH: not less than 6.0.
Direction of filtration: outside — inside.

Nominal air flow rate
  • 50 kg / h: FP-1,0-KS-1-102 / P1-50;
    ФП-5,0-КС-1-102 / П1-50;
    FP-25.0-KS-1-102 / P1-50.
    Replaceable filter elements:
    FEN-P 1.0-102 / P1;
    FEN-P 5.0-102 / P1;
    FES-P 25.0-100 / P1.
  • 250 kg / h: FP-1,0-KS-1-254 / P-250;
    FP-5,0-KS-1-254 / P-250;
    FP-25.0-KS-1-254 / P-250.
    Replaceable filter elements:
    FEN-P 1.0-254 / P;
    FEN-P 5.0-254 / P;
    FES-P 25.0-254 / P.
  • 500 kg / h: FP-1,0-KS-1-508 / P-500;
    FP-5,0-KS-1-508 / P-500;
    FP-25.0-KS-1-508 / P-500.
    Replaceable filter elements:
    FEN-P 1.0-508 / P;
    FEN-P 5.0-508 / P;
    FES-P 25.0-508 / P.
REGENERATION
Filter: FP-1.0; FP-5,0purge the filter element with a return flow of steam or gas.
Filter: OP-25,0washing of the filter element with detergent solutions using a brush and subsequent purging with a return flow of steam or gas.
APPLICABLE MATERIAL
Filter element: FP-1,0; FP-5,0; FP-25.0;nickel, stainless steel mesh woven stainless
Housingstainless steel
Sealsrubber based on silicone rubbers

50 kg/h

Filters for cleaning steam from mechanical impurities with a nominal steam flow of 50 kg/h.
Фильтры для очистки пара от механических примесей с номинальным расходом пара 50

Saturated water vapor temperature, °C: 150
Water vapor flow rate, kg/h, max: 50
Filter area: 180 cm²
Filter area: 125 cm²

Initial pressure drop at nominal flow and size of penetrating particles:

≤ 0.18 atm → filter FP-1,0-KS-1-102 / P1-50;
≤ 0.15 atm. → filter FP-5,0-KS-1-102 / P1-50;
≤ 0.10 atm. → Filter FP-25.0-KS-1-100 / P1-50.

250 kg/h

Filters for cleaning steam from mechanical impurities with a nominal steam flow of 250 kg/h.
Фильтры для очистки пара от механических примесей с номинальным расходом пара 250

Saturated water vapor temperature, °C: 150
Water vapor flow rate, kg/h, no more than 250

Area of ​​filter surface:

580 cm² → FP-1,0-KS-1-254 / P-250,
FP-5,0-KS-1-254 / P-250.
520 cm² → FP-25.0-KS-1-254 / P-250.

Initial differential pressure at nominal steam flow rate:

≤ 0,09 atm. → filter FP-1,0-KS-1-254 / P-250;
≤ 0,07 atm. → filter ФП-5,0-КС-1-254 / П-250;
≤ 0,05 atm. → Filter FP-25.0-KS-1-254 / P-250.

500 kg/h

Filters for cleaning steam from mechanical impurities with a nominal steam flow of 500 kg/h.
Фильтры для очистки пара от механических примесей с номинальным расходом пара 500

Saturated water vapor temperature, °C: 150
Water vapor consumption, kg / h, no more than: 500

Area of ​​filter surface:

1140 cm² → FP-1,0-KS-1-508 / P-500;
FP-5,0-KS-1-508 / P-500.
1080 cm² → FP-25.0-KS-1-508 / P-500.

Начальный перепад давления при номинальном расходе пара:

≤ 0,45 атм→ фильтр ФП-1,0-КС-1-508/П-500;
≤ 0,41 атм→ фильтр ФП-5,0-КС-1-508/П-500;
≤ 0,37 атм→ фильтр ФП-25,0-КС-1-508/П-500.

Back To Top