skip to Main Content
Фильтры для предварительной, основной и тонкой очистки газов от масла и влаги (фвд-п, фвд-о, фвд-т)
Filters For Preliminary, Basic And Fine Cleaning Of Gases From Oil And Moisture

Filters are designed for preliminary, basic and fine cleaning of air and other gases, chemically inert to the materials of the hull and filter element, from aerosols of oil, moisture and mechanical impurities.

Efficiency
  • Preliminary and basic gas cleaning from oil and moisture with a particle size of more than 0.3 μm:
    – not less than 98%;
  • Fine cleaning of gases from oil and moisture with a residual content of particles larger than 0.01 μm:
    – more than 99.999%.
Direction of filtration
  • From the inside to the outside (for filter elements FEN / P-Pr, FEN / P-Pr 1.0 and FEN / P-T)
The size of the penetrating particles
  • 5.0 microns for FVD-P filters;
  • 1.0 μm for FVD-O filters;
  • 0.01 μm for FVD-T type filters.
Working temperature
  • up to + 70 ° С
APPLICABLE MATERIAL
Filter element
nickel, polyurethane foam
Housingstainless steel
Sealsrubber based on silicone rubbers
Nominal air flow rate
  • 60 nm³ / h for filters with a working pressure of 8 atm:
    FVD-P-KS-1-128 / P1-60;
    FVD-O-KS-1-128 / P1-60;
    FVD-T-KS-1-128 / P1-60.
    Replaceable filter elements:
    FEN / P-Pro 5.0-128 / P1;
    FEN / P-Pr 1.0-128 / P1;
    FEN / P-T 128 / P1.
  • 140 nm³ / h for filters with a working pressure of 8 atm:
    FVD-P-KS-1-128 / P1-140;
    FVD-O-KS-1-128 / P1-140;
    FVD-T-KS-1-128 / P1-140.
    Replaceable filter elements:
    FEN / P-Pro 5.0-128 / P;
    FEN / P-Pr 1.0-128 /
  • 280 nm³ / h for filters with a working pressure of 8 atm:
    FVD-P-KS-1-254 / P-280;
    FVD-O-KS-1-254 / P-280;
    FVD-T-KS-1-254 / P-280.
    Replaceable filter elements:
    FEN / P-Pr 5.0-254 / P;
    FEN / P-Pr 1.0-254 / P;
    FEN / P-T 254 / P.
  • 560 nm³ / h for filters with a working pressure of 8 atm:
    FVD-P-KS-1-508 / P-560;
    FVD-O-KS-1-508 / P-560;
    FVD-T-KS-1-508 / P-560.
    Replaceable filter elements:
    FEN / П-Пр 5,0-508 / П;
    FEN / P-Pr 1.0-508 / P;
  • 1700 nm³ / h for filters with a working pressure of 8 atm:
    FVD-P-KS-3-508 / P-1700;
    FVD-O-KS-3-508 / P-1700;
    FVD-T-KS-3-508 / P-1700.
    Replaceable filter elements:
    FEN / П-Пр 5,0-508 / П;
    FEN / P-Pr 1.0-508 / P;
    FEN / P-T 508 / P.
Pre, main and fine filters
with a nominal flow rate of 60 nm³ / h
Фильтры предварительной, основной и тонкой очистки с номинальным расходом 60

Absolute working pressure, atm: 8
Air consumption, Nm³ / h, not more than: 60
Filter area: 180 cm²

Initial pressure drop at nominal flow and size of penetrating particles:

  • not more than 0,075 atm → for filters type FVD-P-KS-1-128 / P1-60;
  • not more than 0.080 atm. → for filters type FVD-O-KS-1-128 / P1-60;
  • not more than 0.15 atm → for filters type FVD-T-KS-1-128 / P1-60.

Final pressure drop:

  • not more than 1.0 atm → for filters type FVD-P-KS-1-128 / P1-60 and FVD-O-KS-1-128 / P1-6;
  • not more than 0.6 atm. → for filters type FVD-T-KS-1-128 / P1-60.
Pre, main and fine filters
with a nominal flow rate of 140 nm³ / h
Фильтры предварительной, основной и тонкой очистки с номинальным расходом 140

Absolute working pressure, atm: 8
Air consumption, Nm³ / h, not more than: 140
Filter area: 250 cm²

Initial pressure drop at nominal flow and size of penetrating particles:

  • not more than 0.04 atm. → for filters type FVD-P-KS-1-128 / P-140;
  • not more than 0.05 atm. → for FVD-O-KS-1-128 / P-140 filters;
  • not more than 0,15 atm → for filters type FVD-T-KS-1-128 / P-140.

Final pressure drop:

  • not more than 1.0 atm → for filters type FVD-P-KS-1-128 / P-140 and FVD-O-KS-1-128 / P-140;
  • not more than 0.6 atm. → for filters type FVD-T-KS-1-128 / P-140.
Pre, main and fine filters
with a nominal flow rate of 280 nm³ / h
Фильтры предварительной, основной и тонкой очистки с номинальным расходом 280

Absolute working pressure, atm: 8
Air consumption, Nm³ / h, not more than: 280
Filter area: 540 cm²

Initial pressure drop at nominal flow and size of penetrating particles:

  • not more than 0.04 atm. → for filters type FVD-P-KS-1-254 / P-280;
  • not more than 0.05 atm. → for FVD-O-KS-1-254 / P-280 filters;
  • not more than 0,15 atm → for filters type FVD-T-KS-1-254 / P-280.

Final pressure drop:

  • not more than 1.0 atm. → for filters type FVD-P-KS-1-254 / P-280 and FVD-O-KS-1-254 / P-280;
  • not more than 0.6 atm → for filters type FVD-T-KS-1-254 / P-280.
Pre, main and fine filters
with a nominal flow rate of 560 nm³ / h
Фильтры предварительной, основной и тонкой очистки с номинальным расходом 560

Absolute working pressure, atm: 8
Air consumption, Nm³ / h, not more than: 560
Filter area: 1110 cm²

Initial pressure drop at nominal flow and size of penetrating particles:

  • not more than 0.27 atm → for filters type FVD-P-KS-1-508 / P-560;
  • not more than 0.28 atm → for filters type FVD-O-KS-1-508 / P-560;
  • not more than 0,15 atm → for filters type FVD-T-KS-1-508 / P-560.

Final pressure drop:

  • not more than 1.0 atm → for filters type FVD-P-KS-1-508 / P-560 and FVD-O-KS-1-508 / P-506;
  • not more than 0.6 atm. → for filters type FVD-T-KS-1-508 / P-560.
Pre, main and fine filters
with a nominal flow rate of 1700 nm³ / h
Фильтры предварительной, основной и тонкой очистки с номинальным расходом 1700

Absolute working pressure, atm: 8
Air consumption, Nm³ / h, not more than: 1700
Filter surface area: 3330 cm²

Initial pressure drop at nominal flow and size of penetrating particles:

  • not more than 0,19 atm → for filters type FVD-P-KS-3-508 / P-1700;
  • not more than 0.20 atm → for filters type FVD-O-KS-3-508 / P-1700;
  • not more than 0,15 atm → for filters type FVD-T-KS-3-508 / P-1700.

Final pressure drop:

  • not more than 1.0 atm. → for filters type FVD-P-KS-3-508 / P-1700 and FVD-O-KS-3-508 / P-1700;
  • not more than 0.6 atm. → for filters type FVD-T-KS-3-508 / P-1700.
""
1
Ваше Имя
Ваш телефон
Предмет обращенияmore details
0 /
Previous
Next
×
Back To Top
X